NCI records for Errata is given in Errata and Known Issues for CORDEX-CMIP6 and Regional Downscaling - CMIP Community - Opus - NCI Confluence.

The Bureau of Meteorology seeks user feedback on the quality and their usage of the data, to help identify areas for improvements.

Please email help@nci.org.au 


BARPA-R
Affected ModelAffected DomainAffected VariableAffected FrequencySeverityIssuesActionStatus
AllAus-15evspsblAllMajorData is yet to be releasedWill be released in 2024Fixed. Data is released with v20231001 and git commit 9e680fd and later.
AllAus-15sund, tasmax, tasmin, rluscs, rsuscs, rsdscs, rldscs, CAPE, evspsblpot, cll, clm, clh, clt, prc, prsn, pr, snm, tauu, tauv, mrros, mrro 1 day (sund only), 1 hr, 6hrMinorTime-bounds attribute is missing. Time-bounds to be addedCurrent
BARPA-R-NorESM2-MM
BARPA-R-CESM2
BARPA-R CMCC-ESM2
Aus-15ta10, wa10, zg10, hus10AllMinorMissing data - low model top due to lack of mid-stratospheric driving data from driving GCMdata to be redactedCurrent
AllAus-15CAPE and CINAllModerateBiases in CAPE and CIN due to inaccuracies in parcel ascent computation used in Unified Model UM v11.9.Alternative data from Bureau's ConvParams will be made available but over a truncated domain limited to AustraliaCurrent
AllAus-15evspsblpot1 hour, 1 dayMinorIsolated unphysical peaks and negative values due to modelling artefacts occur occasionally throughout datasetNo actionCurrent
MPI-ESM1-2-HRAus-15evspsblpot1 hour, 1 day, monMinorIsolated unphysical peaks and negative values due to modelling artefacts was too large for packing. This occurs at 2079-07-18T00:30. This value has been masked in the model output before processing hourly, daily and monthly data.Data to be maskedFixed. Data masked with v20231001 and later.
AllAus-15evspsblpot1hr, day, monModerateThe potential evapotranspiration (PET) is the ET that would occur if the soil and vegetation are saturated. The PET scales with the friction velocity for each tile type (e.g., grass, shrub, broadleaf tree, bare soil), which depends on the canopy heights etc. PET is computed by the model for each tile type and the average across the tiles are computed and published. However, the energy constraint is not imposed on the calculation of this diagnostic in the model, which is different from using the Penman-Monteith equation.  In other words, the PET diagnostic is simply driven by a surface to atmosphere humidity difference. Accordingly, it is expected that the PET diagnostic will be higher than the values in other PET products such as SILO PET (https://data.qld.gov.au/dataset/silo-climate-database). Different definitions of PET can be computed from BARPA's other gridded fields. For instance, Penman-Monteith equation requires 2m temperature (tas), relative humidity (hurs), wind speed (sfcWind), surface pressure (ps), net SW radiation at surface (rsds, rsus or rss), cloud cover (clt), No actionCurrent
AllAus-15mon/mrfso, mrfsol, mrsol, mrsol, mrfsos, mrsosAllMinorSpin up of land surface moisture in alpine regions can take up to 3 yearsNo actionCurrent
AllAus-15hus10, 20, 30, 50, 706 hour, 1 dayMinorSpurious values of high stratospheric humidity occur occasionally throughout datasets. A cap to the minimum value of specific humidity of 2.5e-6 has been applied at the domain boundariesNo actionCurrent
BARPA-R-ACCESS-CM2 ssp126Aus-15all variables1 hour, 6 hour, 1 dayModerateErroneous data has been masked: 2049-07-01 to 2049-07-03Data to be maskedFixed. Data masked with v20231001 and later.
BARPA-R-ACCESS-ESM1-5 ssp370Aus-15all variables1 hour, 6 hour, 1 dayModerateErroneous data has been masked: 2029-04-21 to 2029-04-22. Data to be maskedFixed. Data masked with v20231001 and later.
BARPA-ACCESS-ESM1-5 ssp126Aus-15all variables1 hour, 6 hour, 1 dayModerateErroneous data has been masked: 9/9/2073, 10/9/2073, 17/10/2073, 18/10/2073Data to be maskedFixed. Data masked with v20231001 and later.
BARPA-ACCESS-ESM1-5 ssp126Aus-15ua50m, ua100m, ua150m, ua200m, ua250m, ua1500m, ta50m, ta100m, ta150m, ta200m, ta250m, ta1500mAllMinorData is missing: 2083-08Data to be maskedFixed. Data masked with v20231001 and later.
AllAus-15ta200m, ua200m, va200m, ua250m, va250, ta250mAllMinorMasked in regions with high orographyNo actionCurrent
AllAus-15huss, hurs1 hourmoderate

Spurious high values of humidity, due to the UM diagnostic calculation of 2m specific humidity. High values should be screened before use or 10m humidity should be substituted. A reduction in diagnosed screen temperature accompanies this spurious increase in diagnosed screen-level moisture.

The fix combines the lowest model level humidity with 10 m humidity over land.

10 m humidity based on unaffected model-level fields over land will also be providedFixed
AllAus-15huss, hursAllminor

On rare occasions specific humidity has unphysical small negative values over a few grid cells. This also results in missing values for wet-bulb temperature.

Re-process data and set to minimum valueCurrent
AllAus-15tas, tasmax, tasmin1 hourminorSpurious high values of humidity, due to the UM diagnostic calculation of 2m specific humidity. High values should be screened before use or 10m humidity should be substituted. A reduction in diagnosed screen temperature accompanies this spurious increase in diagnosed screen-level moisture.10 m humidity based on unaffected model-level fields over land will also be providedCurrent
AllAus-15prc1 hourMinorSome months show an increase in maximum convective rainfall rates due to a reduction in the model timestep for model stability issues. No action. A list of impacted months can be provided on request.Current
AllAus-15hurs1 hourMinorRelative humidity values in excess of 100% can be observed over the southern ocean. These are believed to be associated with supersaturationNo actionCurrent
BARPA-R-ACCESS-CM2,
BARPA-R-EC-Earth3
Aus-15ta1500m1 hourMinorSingle spurious high values present over oceanic grid-points:
BARPA-R-ACCESS-ESM1.5 historical:  1968-02-11 14:00
BARPA-R-ACCESS-ESM1.5 ssp370:  2081-09-14 07:00
BARPA-R-EC-Earth3 ssp126: 2075-01-12 14:00
BARPA-R-EC-Earth3 ssp370: 2076-02-08 15:15 
No actionCurrent
BARPA-NorESM2-MM historicalAus-15all radiation variables, first day only1 hour, 1 dayMinorTimestep on 1960-01-01 is shifted by 1.5 hours. No other days are affectedNo actionCurrent
AllAus-15pressure level fields, 1000-700 hPaAllMinorPressure level data: Where pressure level is less than surface pressure, data has been masked with fill_valueNo actionCurrent
AllAUS-15tauu, tauvAllModerateThe lat/lon grids for these variables remain in their modelling staggered grids, and thus inconsistent with other variables in the datasetReprocess the data to the common lat/lon gridsFixed. Re-gridded data is released with v20240601 and git commit 

3b55b33 and later.

BARPA-R-CMCC ssp370,

BARPA-R-MPI-ESM1-2-HR ssp370,

BARPA-R-CESM2 ssp126

AUS-15tauu, tauv6hr, day, monMinorValues along the boundary of the domain are NaN in some time steps due to a re-gridding issue.Mask the affected data values.Fixed. The affected data is masked with v20240601
AllAUS-15ManyAllMinorDiscrepancies in lat/lon values between different variables, due to differences to roundingRounding of the lat/lon values in process.Fixed. The lat/lon values have been corrected with version v20231001 and later.
AllAUS-15wsgsmaxAllModerateAn error is found in the Unified model version 11.9 to 13 in its calculation of the wind gust diagnostics.  An incorrect value is used to down weight the gust contribution where there was a large orographic roughness length from the form drag roughness scheme, leading to positive biases. The biases are larger over land than over sea, and the preliminary experiments over UK show an averaged mean error over land is 1-1.5 m s-1, solely due to this error. On average, the mean error is around 10% over land, and 5% over sea.No actionCurrent
BARPA-R NorESM2-MM historicalAUST-15All3hrModerateOn the first of each month, the first time step is missing. A different cycling had to be used for NorESM (with a 3h offset), which seems to have affected ConvParams.No actionCurrent


BARPA-C

All

AUST-04

precipitation

All

Moderate

There is a dry bias present in northern Australia during the wet season. A new model configuration to resolve this is under development.

No action

Current

All

AUST-04

maxcolwa, ztp

1hr

Minor

The troposphere height is determined by checking the lapse rate of surrounding model height intervals. The height cannot always be determined through this approach for BARPA-C with 40 km model lid, and as such the height values are masked."  
maxcolwa is impacted because it is the vertical max between the surface and tropopause, so it inherits nans when the tropopause hasn't be found. 

No action

Current

All

AUST-04

evspsblpot

1hr, day, mon

Minor

Isolated unphysical peaks and negative values due to modelling artefacts occur occasionally throughout dataset

No action

Current

ACCESS-ESM1-5 historical

AUST-04

rsus

1hr, day

Minor

Spurious small value at lat=-16.5, lon=117, time=1996-01-05T21:30:00 associated with TC.

No action

Current

ACCESS-ESM1-5 historical

AUST-04

ta200m

20min, 1hr

Minor

Spurious large value at lat=-13.57, lon=119.5, time=1998-02-23T17:00.

No action

Current

ACCESS-ESM1-5 historical

AUST-04

rss

20min

Minor

Spurious large value at  lat=-16.5, lon=117, time=1996-01-05T22:00 associated with TC.

No action

Current

ACCESS-ESM1-5 ssp370

AUST-04

ta150m, ta200m

20min, 1hr

Minor

Spurious large value at  lat=-27.81, lon=132.02, time=2058-03-10 10:00 for one time step.

No action

Current

ACCESS-ESM1-5 ssp370

AUST-04

ta100m

20min, 1hr

Minor

Spurious large value at  lat=-29.29, lon=125.1, time=2055-12-24 09:20 for one time step.

No action

Current

All

AUS-15

All

All

Minor

As the BARPA data was post-processed and published in stages, some inconsistency in the data attribute information that can affect loading multiple files using python.xarray.open_mfdataset . For instance, some files have crs and/or height metadata information but others do not. 

Users are advised to use the preprocess option in open_mfdataset to remove such inconsistency between individual data files (such as using xarray.Dataset.drop_vars) prior to concatenation. 

 

No action

Current

  • No labels